1. Fit for DJI handle 2. Comfortable holding with a 15°tilt angle 3. Equipped with 1/4''-20 thread holes 4. Compatible with ARRI standard handgrip
can serve as 15mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection
SMALLRIG 1/4" Screw with D-Ring for Camera Rig (2pcs Pack) 1795 supplies spare or replacement screws for cameramen's quick-release plates or other camera rigs. The screw can be tightened or loosened by a hex spanner, a coin/screwdriver or the D-ring.
It can be tightened and loosened by a coin or a screwdriver.
Standard 1/4"-20 Tripod Screw To Cold Shoe Adapter Mount. Both male and female 1/4"-20 thread. Made of aluminum, anodized black.
directly attaches to the the side of the cage with a M6 thread.
SMALLRIG 15mm Micro Rod(1/4''-20 thread-2.5inch) 1653
SMALLRIG 15mm Micro Rod(1/4''-20 thread-2inch) 1654
mounts easily on any standard 15mm rods of DSLR Rig to support 1/4"-20 accessories like LCD field monitors
works with an Articulating Arm to support a monitor or a LED
mounts easily on any standard 15mm rods, and ballhead mount w/ 1/4"-20 male thread to support accessories like LCD field monitors
1. Snaps on to LWS 15mm support rods from down to up 2. Height adjustment meets any diameter (50mm to 140mm) lens barrel 3. Two rubber pads to protect your lens from wear-and-tear 4. Securely locked with a black lever
This 1.5" rod can serve as 15mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection.
w/ 2pcs holes to mount any 1/4" accessories such as LCD Field Monitors, LED Video lights...
with 4pcs 1/4"-20 tapped mounting holes, you can mount any 1/4"-20 DSLR Rig accessories.
features a standard vertical 15mm rod clamp to clamp a vertical 15mm rod or a top handle
This camera base plate is specially designed for DSLR camera use.
This5mm Rail Support System is specially designed for DSLR camera use. Equipped with an Arca Swiss quick release pack on top, which is suitable for most DSLR cameras attached.
SmallRig 15mm Rod Clamp with Arri Locating Pins is exclusively designed for accessories with Arri locating points.
SmallRig 15mm Rod Clamp with ARRI Rosette 1686 can be attached to any equipment features a 15mm rod system. Use the rod ARRI Rosette and M6 female head for attaching any accessory (such as an arm, EVF support, etc.) to your set-up.
It can be used for attaching ARRI Rosette compatible accessories, such as rosette handle, dogbone rosette arm or a wireless follow focus remote control with ARRI Rosette mount.
works with an Articulating Arm to support a monitor or a LED
SMALLRIG 25mm Rod Clamp For DJI Ronin Series 1860 is aiming at mounting additional accessories on the DJI Ronin series, like DJI Ronin, Ronin M, Ronin MX and any other items with 25mm or 1ods. EVF, Ball Head, Cold Shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes.
SmallRig 25mm Rod Support Feet 1914 is exclusively designed for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring.
Includes 2pcs 15cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 20cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 25cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 30cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 40cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 45cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
NEW 15mm rod connector, NEW Design, Much More Stable
1.Fits DJI Ronin & FREEFLY MOVI Pro Stabilizers & all 30mm Rods 2.Attaches articulating arms, EVF mount or cold shoe 1241 3.Attaches 15mm rod clamp for battery plate 4.Quick attachment and detachment 5.M5 thumbscrew with anti-off structure 6.1/4'' & 3/8'' accessory mounting holes
1.Fits DJI Ronin & FREEFLY MOVI Pro & all 30mm Rods 2.Quick attachment and detachment 3.M5 thumbscrew with anti-off structure 4.Easy to adjust the direction of monitor 5.1/4'' & 3/8'' accessory mounting holes
1.Attaches a 30mm rod to a 15mm rod vertically and horizontally 2.Attaches cold shoe 1241 or articulating arms 1497 3.Quick attachment and detachment 4.M5 thumbscrew with anti-off structure 5.1/4'' & 3/8'' accessory mounting holes
1.A cold shoe placed on the top allows for mounting the flash lamp, microphone or monitor etc. 2.NATO rail for easier mounting. 3.Anti-twist design at the bottom.
1.Perfectly matched to your camera and leaves all buttons and dials available 2.Benefits heat dissipation and prevents unwanted twist 3.A cold shoe and a side NATO rail for articulating arm, EVF mount, microphone attachment 4.One NATO rail on the top for NATO handle attachment 5.Allows to mount SMALLRIG cold shoe 1241 for more accessories attachment...
specially designed for Blackmagic URSA Mini/URSA Mini Pro Camera. Composed of a top plate, a baseplate, a side plate and a top handle.
provides a simple sturdy mount for your monitor or electronic viewfinder.
1. Locked tight by 2 M4 screws2. 1/4'' & 3/8'' threads on one end enables to attach magic arms 3. Arri locating pins on the other end could secure cage or other devices firmly
SMALLRIG ARCA Quick Release Plate 1869 is a subassembly of 1817. It's a custom-designed Arca QR plate, which can be placed on horizontal surface reposefully. Besides, you can put it in any other Arca standard baseplate.
SMALLRIG ARCA Style Quick Release Baseplate Pack (With ARCA Plate) 1817 is a trustworthy platform that make your shooting process more easy and cheerful. It can be used on tripods, sliders, DJI Ronin and more, switch them effortless.
SMALLRIG ARRI Dovetail Clamp with 19mm Rod Clamp 1757 is standard ARRI dovetail clamp with 19mm rod clamp. It fits for ARRI standard dovetail perfectly.
SmallRig Arri Extension Arm 1807 provides 198mm of extension for ArrI-standard rosette handgrips and other gears with Arri style rosette mount, such as RED, URSA Mini, Sony FS7 or other.
1. Compatible with any ARRI standard accessories 2. Quick attachment and removal 3. 360°angle adjustment 4. Allows for shoe mount accessories attachment
The stainless steel and aluminum alloy material make the rosette mount more sturdy and lightweight.
It adopts a lightweight design and provides flexibility for creative monitoring. It can be attached to the shogun monitor easily and securely with two 1/4"-20 screws. Two 15mm rod clamps allow you to mount the rods conveniently. The humanized anti-slip rubber pad at the bottom of the cage is meant to offer you a steady rig.
Basic Handle V2 mounts easily to any industry standard 15mm rod.
Compatible with Anton Bauer QRC, Switronix, RED, Blueshape, IDX
made of ALL Stainless Steel, much more stronger
Only one piece!10cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Soft rubber grip handles.
with M5(5mm) thread and is compatible with railblock 942
with M5(5mm) thread, the length of screw is 18mm
SMALLRIG Black Ratchet Wingnut with M5 thread(18mm) 10pcs Pack 1838, the length of thread is 18mm. It is compatible with railblock 1266
SMALLRIG Black Ratchet Wingnut with M5 thread(18mm) 2pcs Pack 1837, the length of thread is 18mm. It is compatible with railblock 1266
SMALLRIG Blackmagic Video Assist SDI Cable 1805 is a SDI cable specially used for Blackmagic Video Assist. The length is 100cm.
Includes a BMMCC/BMMSC Cage and a HDMI cable.
It perfectly holds your camera inside and leaves all buttons available
Two built-in cold shoe mounts on the top for attaching small and light accessories, such as microphone, monitor mountings, etc.
SMALLRIG Cage for Panasonic Lumix DMC-GX85/ GX80/ GX7 Mark II 1828 is a cage which can form-fitting your Panasonic Lumix DMC-GX85/ GX80/ GX7 Mark II Camera.
It is a perfect cage, specially designed for Panasonic GH4/GH3 Camera.
comes with 1/4"-20 thread
Camera Fixing Screw with standard 1/4"-20 thread, features Quick release D-ring.
with standard 1/4"-20 thread, compatible w/ tripod plates such as Manfrotto 503HDV
with standard 1/4"-20 thread
with standard 3/8"-16 thread, features Quick release D-ring
SMALLRIG Camera Screw 1/4" 18mm Long 1800 is designed specifically for screwing two thicker parts together. The unique design let you tight or loose without tools conveniently. Best fitting for SmallRig Double-Threaded Rosette Mount 1746.
SmallRig Camera/Camcorder Action Stabilizing NATO Handle 1955 is a sliding top handle for moving shoots. It is designed for quick release attaching and detaching on the camera without screws.
It also fits for Sony FS7 and any other cameras.
a multi-purpose mounting plate with plenty of ¼"-20 and 3/8"-16 holes
includes a Ball Head Cold Shoe Mount and a Clamp
The Hot Shoe Adapter 3/8" to 1/4" is part of the CoolArm11, and may be used to mount an accessory with 1/4" socket to the hot shoe of a camera.
comes with standard 3/8"-16 on both ends
SmallRig Counterweight 1890 is made to keep balanced and regain the feeling of sturdiness when used in shoulder mounting. You can mount it on 15mm rods and lock it with a wing nut quickly.
SmallRig DJI Ronin Quick Plate Universal Mount 1759 is designed to conveniently switch your camera between Ronin and any other camera support platform without having to remove the Ronin dovetail or detach the camera.
SMALLRIG 25mm to 15mm Rod Clamp for DJI Ronin Series 1816 is designed to solve the problem that there is no available access for mounting accessories on the DJI Ronin series. It is compatible with DJI Ronin, Ronin M, Ronin MX and any other 25mm or 1ods.
includes an articulating double ballhead and a 1" rod clamp 1860. You can attach the 1 rod to the existing rail clamp system.
This is a combination of two double head screw: a 1/4"-20 to 1/4"-20 stainless steel (metal) screw, and a 1/4"-20 to 3/8"-20 stainless steel (metal) screw.
Double Head Stud-1/4"-1/4" comes with standard 1/4"-20 thread on both ends.
SMALLRIG DV Battery Plate Adapter for BMPCC/BMCC/BMPC 1765 is a battery adapter which fits securely on the back of F970/F750/F550 battery on the rear of the panel. It gives users the ability to converting voltage to 12v easily and attaches camera battery normally used with BMPCC/BMCC 2.5K/BMPC 4K.
1.ARRI standard rosettes (M6, 31.8mm diameter) on opposite ends 2.Feature an adjustable NATO rail with 167mm-255mm extension distance 3.360°angle adjustment according to your usage requirement 4.1/4'' & 3/8'' thread holes for additional accessories attachment 5.Relocate the ARRI rosette handle to achieve remote control
It leaves all buttons and dials accessible, especially not obstructing your camera hot shoe.
1. Compatible with 15mm double rod rails 2. Handgrip features height adjustment 3. Attaches Arri standard extension arms or rosette handles 4. Allows to mount a lens support
1. Fits more rigs with two 1/4'' thread holes on the bottom 2. M6 thread could be a female and a male head 3. Compatible with standard ARRI rosette or SMALLRIG standard rosette
SMALLRIG HDMI Cable Clamp 1822 can provide strain relief for HDMI cable where frequent tugging could cause damage to the camera. With only one screw to mount to the cage and lock the cable, it can save space for other accessories.
SMALLRIG LANC Remote Cable For Sony PXW-FS5 Handgrip (2.5mm )1824 allows you to relocate the fs5 handgrip, and provides an access to remote control of the camcorder.
SMALLRIG Hot Shoe with 1/4" Male Screw and Cold Shoe Base with 1/4" Female Hole 1639
SMALLRIG LCD Screen Sun Shield Hood for DSLR Cameras and Camcorders 1972 is the LCD screen protective cover, which protects your Panasonic Lumix GH5/GH4/G85/G7/GX8 from glare when shooting outdoors.
1. It is equipped with an array of 1/4’’ and 3/8’’ threaded holes for magic arm and monitor.2. Arri locating point is used to connect Anti-rotation Magic Arm Adapter 1978 for magic arm.3. The cold shoe could connect wireless receiver.4. The plate is secured on the camera body via three M3 screws.5. Integrated NATO rail is utilized to attach handles and...
SMALLRIG Lens Adapter Support 1764 helps keep lens stable for sharper images. It is underneath the camera cage and also connects to the Metabones tripod foot.
SmallRig Lens Adapter Support for Panasonic Lumix GH5 2016 is exclusively designed for GH5 1965 cage.
1. Protect metabones lens adapter well 2. Share lens pressure at a certain degree 3. Fit different lens sizes 4. Accommodate SMALLRIG baseplate 1827
It attaches to a cage securely using a 1/4''-20 screw to a cage.
SMALLRIG Long Lens Double Rod Clamps Adjustable Support (15/19mm) 1783 is perfect for long lenses and is compatible with any standard 15mm or 19mm rod system.
perfect for long lenses and is compatible with any industry-standard 15mm rod system
.Could be mounted on the products with Arri locating points2.Attachable to monitor3.M4 screw is used to lock the magic arm firm4.Equipped with 1/4’’ and 3/8’’ threaded holes for magic arms with corresponding screws
SMALLRIG Male-Male LANC Cable With a Cover For Sony PXW-FS5 Handgrip 1835 is used for replacing the original Sony FS5 short lanc cable. It allows you to relocate the handgrip of FS5, and provides an access to remote control of the camcorder. The form-fitting cover can stop the plug from sliding.
Manfrotto Standard Quick Dovetail (5.5") 1767 is compatible with Manfrotto 526 (3274), 3147 (510), 516 fluid head and Manfrotto RC3 quick release system. Besides, it can switch from tripod to other usage scenarios quickly. Supplied with 1/4'', 3/8'' and M4 threaded holes for accessories attachment.
1.Two shoe mount on the top and bottom to expand your camera rigs 2.Balance-adjustable groove while using monitor/electronic viewfinder 3.Fit 15mm micro rod 4.1/4"-20 & 3/8"-16 threads
SMALLRIG Monitor Cage for Blackmagic Video Assist 7’’ 1830 is a Monitor cage which can fit your Blackmagic Video Assist monitor well with two 1/4’’-20 threads on the bottom.
1. Perfectly matches to your monitor and helps to dissipate heat 2. Shoe mount, side and bottom NATO rails for accessories attachment 3. Compatible with PIX-LR by adjusting the height of the cage freely. 4. Allows to mount HDMI clamp to protect the HDMI cable 5. Compatible with Video Devices original sunhood
SMALLRIG Mounting Plate with 15mm Rod Clamps 1775 is an aluminum plate with 15mm rod clamps for camera mounting, which supplies protective and stable mounting options to camera devices.
It is applied to tripod or any plate with the 1/4" -20 thread point
This removable ball head has a single locking knob for adjusting the angle at ease without obstruction.
It works with our Double Head Stud w/ 1/4" to 3/8" thread, and make it work as a Double head stud w/ 3/8" to 3/8" thread.
The short rod, which saves time on assembling.
1. 1/4’’ counterbores could be used to attach GH5 Cage 1965.2. The integrated NATO rail is accessible to clamp on the handle.3. 15mm rod clamp could attach the rod of EVF support for monitor. 4. Arri locating points could be extended via Arri locating points extension.5. It provides solid protection for DMW-XLR1 microphone adapter.
1.Top plate could attach the camera via four 1/4’’ screws, covering the top camera tight.2.Base plate is equipped with an array of 1/4’’ and 3/8’’ threaded holes for quick release plate and 19mm bridge plate.3. Left side plate 1997 comes with a NATO rail and an Arri rosette to attach handles for better handheld shooting experience.4. Right side plate fits...
SMALLRIG Power Cable for Blackmagic Cinema Camera/ Blackmagic Video Assist/ Shogun Monitor 1819 is used to connect the external battery to the camera or monitor for power transmission.
features quick release 15mm rod clamps (60mm apart center to center), so it can be easily installed anywhere on 15mm rods without removing other accessories.
Quick Release Camera Fixing Screw with standard 1/4"-20 thread and 3/8"-16 thread.
SmallRig Quick Release NATO Clamp 1973 is a NATO standard clamp designed to attach a variety of accessories, such as cold shoe, articulating arm, monitor support ball head and so on.
Ratchet Wingnut with 1/4"-20 thread. Made of Aluminum Alloy.
SMALLRIG Red Ratchet Wingnut M5 thread Screw 2pcs 1623.
This kit fits well with the camera and supports handheld, shoulder rig mount and tripod system.
A shoe mount is provided for wireless receiver or monitor mounting.
A NATO rail is provided for NATO handle attachment.
1. Made of handcrafted rosewood, comfortable and attractive 2. Applies in handheld and shoulder mounting system 3. Adjusts the position of ARRI rosette up and down within a certain range 4. Connection through rosette, more secure
SMALLRIG Rod Clamp Rail Block for 15mm Rod DSLR Rig 1806 is widely used on standard DSLR/DV support rig to attach bracket or device for convenient shoot and recording.
Rod Coupler with 1/2"-13 thread. It allows to connect any of our threaded 15mm rods w/ 1/2"-13 threads together.
quick release or mount your monitor or EVF to standard 15mm rod, easily adjust the monitor angle
The kit comes with independent anti-slip handles utilizing SmallRig rosettes.
can attach to Bolt on ARRI Style Rosette, Crossbar, Rosette Arm, or existing ARRI equipment, but uncompatible with RED rosette
It provides quick released functionality between cameras and accessories.
SMALLRIG Safety NATO Rail 93mm (Shoe Mount) 1962 comes with a bottom cold shoe mount, attaching to standard camera hot shoe in order to mount accessories, like NATO handles, lights, microphones, etc.
SMALLRIG hood for Blackmageic monitor cage(5 1821 is a monitor hood for the SMALLRIG Blackmagic Video Assist Cage(5'') 1726. The monitor hood mount to the cage by four screws, so it is stable and easy for assembly or disassemble. With connect the monitor by plush side, it is perfect fit cage and prevent light leakage.
features standard female 1/4"-20 to male 3/8"-16 thread, made from copper
features female 3/8"-16 to male 1/4"-20 thread, made from copper
A cold shoe mount is designed for microphone, wireless receiver or light monitor mounting attachment.
SMALLRIG Side Plate for SmallHD 700 Series Monitor 1899 is specially designed for SmallHD 501, 502, 701LITE, 702LITE and 702BRIGHT.
SmallRig Single Quick Release Clamp (15mm LW) 1976 mounts on a 15mm rod by clamping onto one rod vertically and horizontally without moving the existed rod.
1. HDMI cable protection 2. Compatible with SmallHD sunhood 3. Mount a Battery Plate 4. Articulating arm, EVF mount or NATO handle attachment
SMALLRIG SmallHD 700 Series Monitor Cage 1834 is designed for SmallHD 700 series monitors, include 701 LITE, 702 LITE and 702 BRIGHT. This cage consists of 3 parts, a NATO rail on each side of the cage, a cold shoe on the top and a HDMI protector which can lock the cable security. And non-interference with the use of the original SmallHD sunhood.
It is compatible with top handles and 15mm rods.
A shoe mount on the top of the cage allows you to mount microphone etc.
supports to shoot at multi-angle and can be handheld easily.