Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) Free shipping!
Tax 0,00 €
Total (tax incl.)
The rod cap is M12(12mm) threaded and screws into your rods to prevent your equipment from accidentally sliding off of your rods.
Standard 1/4"-20 Tripod Screw To Cold Shoe Adapter Mount. Both male and female 1/4"-20 thread. Made of aluminum, anodized black.
1.It is equipped with 1/4’’ screws on both ends respectively. 2.It could attach monitor via the 1/4’’ screw on the one end and attach accessories with 1/4’’-20 threaded holes on the other end.3.Mounted with 1/4’’ screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
SmallRig 15mm Rod Clamp with ARRI Rosette 1686 can be attached to any equipment features a 15mm rod system. Use the rod ARRI Rosette and M6 female head for attaching any accessory (such as an arm, EVF support, etc.) to your set-up.
1.5 inch long (about 38mm), 1/4" holes in both ends. Fits QR-Pack-1503.
about 50mm, 1/4" holes in both ends, standard 15mm diameter
2.5 inch long (about 63.5mm), 1/4" holes in both ends. Standard 15mm diameter.
works with an Articulating Arm to support a monitor or a LED
SMALLRIG 25mm Rod Clamp For DJI Ronin Series 1860 is aiming at mounting additional accessories on the DJI Ronin series, like DJI Ronin, Ronin M, Ronin MX and any other items with 25mm or 1ods. EVF, Ball Head, Cold Shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes.
Includes 2pcs 15cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 25cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 40cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
Includes 2pcs 45cm long industry standard 15mm rod. There is an inner M12 thread on each end of a rod, so that you can extend the rod with an M12 threaded rod.
It is a multi-function ARRI Rosette(M6, 31.8mm diameter) Mount.
Swivel Ball-Head, a Shoe adapter, a 1/4" screw and a Small spanner. The shoe adapter fits cameras such as Canon, Nikon, Olympus, Pentax, Panasonnic, Fujifilm & Kodak.
made of ALL Stainless Steel, much more stronger
There is an integrated and anti-twisted NATO rail on top for attaching NATO standard accessories directly.
It is the first cage for Olympus E-M1 Mark II in the market.It is lightweight and easy to be carried, with only 116gIt could be used in the handheld shooting and gives the cameraman a sense of original handleIt supports handheld, run-and-gun and tripod shooting with external accessories
1.The bottom of GH4 cage is utilized to connect quick release plate via one 1/4’’ threaded hole and one 3/8’’ threaded hole for tripod or 15mm LWS System 1729.2.An eyelet is designed for wrist strap to ensure its stability during handheld shooting.
Camera Fixing Screw with standard 1/4"-20 thread, features Quick release D-ring.
with standard 1/4"-20 thread, compatible w/ tripod plates such as Manfrotto 503HDV
with standard 1/4"-20 thread
compact and portableformfitting and compatibleNATO rail side bracket design for more functions
a multi-purpose mounting plate with plenty of ¼"-20 and 3/8"-16 holes
takes advantage of dual-mount capabilities, featuring Cold Shoe and 15mm rail clamps to broaden your configuration options.
Includes 1 piece!Comes with standard 1/4"-20 thread on both ends
this is a universal adapter spigot stud for the studio usage
comes with standard 3/8"-16 on both ends
Double Head Stud-1/4"-1/4" comes with standard 1/4"-20 thread on both ends.
It features a L-bracket that you can adjust a proper direction for positioning your EVF or monitor
1. Comes with gear racks for anti-twist purpose and firm attachment.2. Monitor mounted on original EVF support could be adjusted in all directions to fit different view distance.3. Quick lock and foldable design. Minimized storage space required.
1. Made of handcrafted rosewood, comfortable and attractive 2. Applies in handheld and shoulder mounting system 3. Adjusts the position of ARRI rosette up and down within a certain range 4. Connection through rosette, more secure
It attaches to a cage securely using a 1/4''-20 screw to a cage.
SMALLRIG Male-Male LANC Cable With a Cover For Sony PXW-FS5 Handgrip 1835 is used for replacing the original Sony FS5 short lanc cable. It allows you to relocate the handgrip of FS5, and provides an access to remote control of the camcorder. The form-fitting cover can stop the plug from sliding.
provides 1/4''-20 and 3/8"-16 threaded holes in standard spacing
It is applied to tripod or any plate with the 1/4" -20 thread point
This removable ball head has a single locking knob for adjusting the angle at ease without obstruction.
directly attaches to the top of monitor/camera cage or matches another NATO rail to achieve side holding your camera or monitor.
It works with our Double Head Stud w/ 1/4" to 3/8" thread, and make it work as a Double head stud w/ 3/8" to 3/8" thread.
The handle is ideal for low-mode shooting and easy transport of your camera.
1. Fits Scarlet and Epic cameras, Blackmagic cameras 2. Cold shoe mount on the top to mount standard shoe accessories3. Slide left and right on the rail to keep balance4. Quick attaching and detaching through a tension lever
is the connector between the Top Plate of Cage 1510/1535 and the Hotshoe on DSLR
Ratchet-Wingnut-M6 thread. Made of Aluminum Alloy.
includes 10pcs Red Ratchet Wingnut with M5(5mm) thread
It directly attaches to the camera bottom with a 1/4'' & a 3/8'' screws.
1. Made of handcrafted rosewood, comfortable and attractive 2. Applies in handheld and shoulder mounting system 3. Adjusts the position of ARRI rosette up and down within a certain range 4. Connection through rosette, more secure
features standard female 1/4"-20 to male 3/8"-16 thread, made from copper
features female 3/8"-16 to male 1/4"-20 thread, made from copper
10pcs Screw Adapters with female 1/4" thread to male 3/8" thread, made of metal
SMALLRIG Side Plate for SmallHD 700 Series Monitor 1899 is specially designed for SmallHD 501, 502, 701LITE, 702LITE and 702BRIGHT.
Attaching this HDMI lock to SmallRig A7II cage with two 1/4'' screws, you can lock your HDMI and USB connector securely.
SMALLRIG Sony A7II/A7RII/A7SII Accessories Kit 1894 is a form-fitting cage support package works for Sony A7II/A7RII/A7SII.
A cold shoe mount allows you to connect wireless receiver.
1. It is compatible with original Blackmagic URSA Mini EVF.2. Rod clamp could be attached to 15mm rod for more accessories.3. Cold shoes could attach microphone or attach Magic Arm 1497 for monitor.4. Arri locating points could attach Anti-rotation Magic Arm Adapter 1978 for monitor.
SMALLRIG Universal Microphone Suspension Shock Mount 1802 is designed to help eliminate vibrations and noise.
Super lightweight 15mm Rail Clamp with standard 1/4"-20 thread
SmallRig Shoulder Pad 2057 is exclusively designed for universal cameras, be it large or small. It is the perfect choice for DSLR, mirrorless cameras and so on. In addition, it could attach big cameras, with enough space and joints for others devices. It offers an abundance of possibilities for the cameraman and is very beneficial and convenient.
SmallRig V-Lock Assembly Kit 1846 is a quick release set based on the standard V-Lock. It comes with a Female V-Dock and a Male V-Lock.
